A clean modern look that will make a statement on any house. These mailboxes have ample room for your mail, magazines and newspaper.
The cut-out window grid design creates a distinctive look. A privacy plate option to block visibility of the mail is included.
Our STAINLESS STEEL MAILBOXES are made of 20 gauge stainless steel, have a satin finish and are designed to be surface mounted.
Available in horizontal and vertical styles.
Stainless Steel Mailboxes – 4525 & 4515
Decorative Style Installation Instructions
Made of stainless steel sheet with a brushed satin finish, decorative stainless steel mailboxes will provide years of
maintenance free service. While the hole locations differ, the mounting method is the same for both the 4515 and 4525 mailboxes.
|
Mounting Mailbox to a Flat Wall
1. The installation fasteners are not provided due to the variation in wall types to which the mailbox might be mounted. Select fastener and anchors appropriate for the type of wall.
2. Mounting access is provided by opening the lid.
3. Where possible, it is best to shield the mailbox from direct
weather conditions.
4. Contact your local post office for the required height of the
mailbox on the wall.
5. Holding the mailbox aligned horizontally in the mounting position mark on the wall the position of the 4 mounting holes in the back wall of the mailbox. The 4 dimpled holes are the mounting holes.
6. Attach the mailbox to the wall using the appropriate fasteners.
|
 |
Attaching Privacy Panel to Mailbox (optional)
1. Place an adhesive backed square on each corner of the privacy panel.
2. Insert the privacy panel through the top opening with the adhesive backed squares towards the front of the mailbox.
3. Center the privacy panel prior to permanently adhering it to the mailbox.
Cleaning
Interior – Using a soft cloth or sponge, clean the interior of the
stainless steel mailbox with liquid soap, detergent, or diluted water-soluble household cleaners. Completely remove residue of any cleaning products with water, and thoroughly dry with a clean cloth or paper towel.
Exterior – The exterior surface of the mailbox may be cleaned as indicated above. Be sure to scrub and polish satin finish materials in the same direction as the grain of the stainless steel. DO NOT use abrasive materials on stainless steel surfaces. |
 |
Great looking Mailbox 
